Produce up to 315 cube-shaped pieces per cycle with this 2.85mL commercial silicone gummy mold. The half-sheet format contains a 15 × 21 cavity layout for gummy candy, vitamins, supplements, nutraceutical products, chocolate, and specialty confectionery.
Product Specifications
- Shape: Cube
- Cavity volume: Approximately 2.85mL per cavity
- Cavity dimensions: Approximately 16 × 16 × 12mm
- Cavity count: 315
- Cavity layout: 15 × 21
- Nominal total mold capacity: Approximately 897.75mL
- Sheet format: Half-sheet
- Material: Platinum-cured silicone
- Purchase format: One mold
- SKU: GM-2P85-CUBE-315-1
Finished piece weight varies with formula density, solids content, ingredients, moisture loss, fill level, coatings, and processing. A 2.85mL cavity does not guarantee a specific gram weight. Produce and weigh a test batch before establishing serving sizes, dosing calculations, package counts, or label claims.
Commercial Production Use
The 315-cavity layout supports testing, pilot batches, and repeatable production. One completely filled mold can produce up to 315 pieces per cycle before accounting for filling loss, rejected pieces, setup, and normal process variation.
Filling and Equipment Fit
This mold may be suitable for hand filling, flood-and-scrape production, and compatible commercial depositing systems. Equipment compatibility is not universal. Verify actual mold and tray dimensions, nozzle spacing, cavity alignment, shot volume, machine clearance, indexing, formula viscosity, and operating conditions before automated use.
Cleaning and Care
- Wash and inspect the mold before first use and between production cycles.
- Use sanitation procedures appropriate for your facility and formulation.
- Avoid sharp tools that could cut or damage cavity surfaces.
- Allow the mold to dry completely before stacking or storage.
- Store flat and protect it from unnecessary compression or distortion.
Frequently Asked Questions
How many pieces does one mold produce?
Each mold contains 315 cube cavities arranged in a 15 × 21 layout.
What is the nominal total capacity?
At approximately 2.85mL per cavity, one completely filled mold has a nominal capacity of approximately 897.75mL.
Can this mold be used with a commercial depositor?
It may be used with compatible equipment after the mold, tray, nozzle pattern, shot requirements, clearance, and operating setup are verified.
Can I order a different cube size or cavity count?
Yes. Review the Custom Gummy Mold options for different dimensions, cavity volumes, layouts, logos, and production requirements.
Compare additional products in the commercial gummy mold collection or use the production calculator to estimate output.